Home > Knowledge > Content

Product Categories

Contact Information

  • Taizhou yuze mechanical and electrical co., ltd
  • Tel: +86-576-88178092
  • Fax: +86-576-88178091
  • Mob: +8613738584737
  • Add: Liuyang industry zone, Xiachen street, Jiaojiang district, Taizhou City, Zhejiang lirovince
  • EmailSales3@china-aircomliressors.com
Inspection cycle and content of each part of the air pump
Dec 24, 2018

Regarding the aspect of the air pump, for us, the more we know about the air pump, the better we can use it to achieve its maximum economic benefits.

During the use of the air pump, there are certain requirements for the inspection of its various parts and the whole. What are the main ones?

In this regard, its main contents are:

(1) The belt in the air pump, as well as the screws in its various parts, etc., should always check how the fastening is tight and whether it is loose.

(2) After the new air pump is put into use for 5 hours, it is necessary to replace the lubricating oil once, and then replace it every 500 hours.

(3) Check the lubricating oil once a day, and perform a work to remove oil and water.

(4) The air filter element should be cleaned or replaced every half month.

(5) Each part of the air pump should be cleaned at least once a year.

When the air pump is in use, there are sometimes noise problems. If the noise is too large, it will bring a lot of problems, and it is also unfavorable to the air pump. Therefore, once the problem occurs, it must be solved. . There are several methods for this, one is that a muffler is installed in the gas generating pump to achieve the purpose of noise reduction. There is also a way to reduce the noise by using a long tube at the end of the suction or exhaust port and winding the tube to reduce noise. Both methods are good.


Previous: No Information

Next: Explanation of Knowledge about Small Air Pumps